Candle Making Equipment, Tools, and Wax Info

1. Candle Molds- Preferably metal molds, the life expectancy of the molds are much longer than the other molds and the results are superb. Any shape or size you desire.
2. Candle Thermometer- You will need to determine the exact temperature of the wax.
3. Double Broiler- Used to melt the wax. Make sure the water does not boil dry. Note: There are a few options you can use depending on how much wax you are going to melt. For a small amount of wax you can use a large soup can or a large coffee can placed inside a saucepan filled with water and can be easily substituted for a double broiler Wax Stamp Seal Kit Initial Letters Alphabet Set B07TCGYHD5.
4. Kitchen Scale- Used to weigh the wax.
5. Mold Sealer- Used to secure wicks and seal wick holes in mold.
6. Mold Release- Used to coat the inside of the mod for easy candle removal. Note: You may also read in other How-To Guides that you can use veggie oil as a substitute, however, in my experience veggie oil dulls the outside of the candle and gives it a not so pretty look. It’s a little too messy also.
7. Pencils or skewer sticks- Used to hold the wick in place while creating your candle.
8. Metal Spoon- Used to mix dyes and scents into wax. Please be sure to clean off previous wax from your spoon before starting a new project.
9. Metal Pouring Pot- Used to contain and pour wax. Also can be used as a double broiler.
10. Wicks or Primed Wicks- (which ever is easier for you, wicks that are not primed already you will have to prime them yourself.) For best results when making pillar candles use Square-braided Wicks or Flat Braided Wicks, the wick size you choose will be determined by the diameter of the candle being made. Please do a little research on wicks before purchasing for optimum candle burning results.
11. Candle Dye Chips/Liquid Dye/Dye Blocks- Either 1 of these work well to achieve color. If you choose Candle Chips they are already in small form, add 2 chips at a time dissolve in melting wax before adding more for your desired color. Liquid Dye is the easiest to work with and give the most depth in color, however, be sure to read the manufactures instructions to achieve your desired color. Dye Blocks work well also, in my experience it is best to shave or cut the blocks into little chips for better melting results. Again, when using any of these items please read manufactures instructions for best results in achieving the color you desire.
12. Wax Paper- Used to cover and protect your work surface.
13. Wax- For this project we will be using Low Melt Point Paraffin Wax. Please be sure to pay attention to the melting point of the wax before purchasing. High Melting Point Wax (Hard Wax for Taper Candle, etc) vs. Low Melting Point Wax (Soft Wax for Pillars) causes different effects to the finished product. You want to be sure you choose the right one for your project. Either or will be fine when making Pillar Candles, again, for this project we will be using a Low Melting Point Paraffin Wax.